Heberlein^® AirSplicer-70-2

The Heberlein® AirSplicer-70-2 with high performance Phoenix knives for up to 18,000 cuts, enables the best splicing quality with flat, clean bound yarn ends and highest strength.

Splicing of Multifilament Yarns
During splicing the ends of two yarns are intermingled by using compressed air. The resulting joint exhibits high uniformity and base yarn strength.

In contrast to a knotted joint, a splice causes less problems in the following processes since the yarn has a more uniform structure.

Area of Application
Recommended for the knot free joining of technical yarns such as high modulus fibers (aramid, Dyneema®, carbon fibers, Zylon®) and glass fiber yarns. The versatile device is applicable for a titer range from 100 up to 48'000 dtex.

Product Benefits
During proper application the useful life of the Phoenix high performance knifes is around 18,000 cuts. This corresponds with an extension of the useful life by a factor of 20 (Basis: Aramid 8050 f 6000 dtex).

The robust design of the splicer guarantees problem-free operation, even under severe conditions with the highest splicing quality and longest lifespan.

The automatic splicing cycle, independent of the operator, serves to ensure high and reproducible splice quality.

Handling
The splicing time ranges from 0.5 - 2 seconds and is dependant on the material and pressure. It can be set freely according to requirements due to the pre-marked adjusting screw for easy reference.

The blow chamber are easily replaced by releasing two screws.

Service
For long term cutting tests with new types of fibre our splicing robot with original unit is available. For further information please apply to our customer service department.